ARC-LOOP II
Application
The ARC-LOOP system is used to detect air ejected parts, slug ejection, and blanked through parts. The loop will detect ferrous as well as non-ferrous materials. The size and weight as well as the material of the part will determine the proper size loop for the application. For steel parts, the surface area of the part must be approximately 20% of the cross sectional area of the loop. Parts made from other metals should have a surface area that is approximately 40% of the cross sectional area of the loop.
Features
|
- Self-contained
- High noise immunity
- Wide variety of loop sizes .5", 1", 2", 4", 6", 12" ID (12.7, 25.4, 50.8, 101.6, 152.4, 304.8mm ID)
- Sensitivity adjustment molded into Loop
- Loops plug directly into the die monitoring system. No other control boxes required.
- Rugged cast epoxy construction
- Unaffected by temperature, Humidity, light dirt or other factory conditions
|
Specifications
| Voltage: |
12 to 24 VDC |
| Current Consumption: |
10 mA |
| Output Duration: |
15ms minimum |
| Construction: |
Cast epoxy
|
| Operating Temperature: |
0°F to 130°F (-17°C to 55°C) |
Mechanical Dimensions
| Part Number |
Inner Diameter |
Approximate Size |
Mountings |
| 91-031-000 |
1/2"
(13mm) |
1" dia x 4.25" long
(25 mm dia. x 108mm) |
Cylindrical Construction |
| 91-031-001 |
1"
(25mm) |
5.5" x 2" x 1"
(140 x 51 x 25mm) |
2 #10 holes in frame |
| 91-031-002 |
2"
(51mm) |
6.5" x 3" x 1"
(165 x 76 x 25mm) |
2 #10 holes in frame |
| 91-031-004 |
4"
(102mm) |
6.75" x 5.5" x 1.25"
(171 x 140 x 32mm) |
4 1/4" (108mm) holes
in frame |
| 91-031-006 |
6"
(152mm) |
8.75" x 7.5" x 1.25"
(222 x 190 x 32mm) |
4 1/4" (108mm) holes
in frame |
| 91-031-012 |
12"
(305mm) |
14.75" x 13.5" x 1.25"
(375 x 343 x 32mm) |
4 1/4" (108mm) holes
in frame |